DOOM Slayer Glove improved and scaled
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gloves armor for the 2016 DOOM Slayer, which can be glued to some gloves.
- Ocena
- 0 / 5
- Polubienia
- 455
- Pobrania
- 963
- Wydruki
- 1
- Wyświetlenia
- 10 362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
Armored glove pieces for DOOM Cosplay.
It is for glove size 9 (L).
All files are for the right hand, so simply flip them for the left hand.
Have fun printing :) and big thanks to Brendan Lautissier for publishing this and other parts of his DOOM cosplay it is a great basis to work with.
See his original work: https://www.thingiverse.com/thing:4921980
Notes:
I recommend to print the pieces one by one, for best quality.
Post-Printing
I glued them all to some textile work glove with hot glue, but I would recommend taking a glove that is a bit bigger than your usual size, so it is more loose and easier to take off.
The backhand part did not quite fit my hand because it had too much curvature, so I used a hot air gun to adjust it a little bit.