Foil Card De-curler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For anyone who has played Magic the Gathering in the last few years has probably experienced the extreme curling of…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For anyone who has played Magic the Gathering in the last few years has probably experienced the extreme curling of foil cards. This renders these cards unplayable. The solution is to have it curled in the opposite direction to stretch the materials and hopefully counteract the curl. Most solutions I found were one card at a time. So some time in tinker cad and a couple of itterations got me to this design.
Required materials beyond the print: Either something heavy to weigh the press closed or something to clamp it closed.
I sized the opening to fit cards in inner sleeves.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Creality PLA White Post-Printing =============
Sand the sides of the inner piece to allow it to slide in easier.
How I Designed This
Designed completely with TinkerCad
Category: Toy & Game Accessories