VanOaks Props Simple LED Gobo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed these light modifiers to help home haunters give their displays and haunted houses more dynamic lighting.…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I designed these light modifiers to help home haunters give their displays and haunted houses more dynamic lighting. By using these parts, a bit of plumbing pipe, and 100mm (3.9") Rosco gobo inserts (4" version) or 60mm (2.3") hand cut gobo inserts (2" version) they can be paired with Eagle Eye LED lights to create patterns in your lighting.
There are two versions. a 4" and 2" version. The inserts are designed to be used with either 4" ABS pipe or a 2" PVC coupler, both can be found at most hardware stores.
File name "LED gobo light mount_light only" is designed for use with the Eagle Eye LED bulbs. File name "LED gobo light mount" is designed for use with the mini spotlight versions created in this video: https://youtu.be/RdRDWb4V9wU
The 4" model is designed to be used with the following steel gobos: https://us.rosco.com/en/products/catalog/gobos?type=67 or can accept 100mm (3.9") hand cut gobos.
There is also a PDF file that includes some 100mm and 60mm breakup pattern designs to be used as a stencil for cutting your own on poster board.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
Yes
Resolution:
.25
Infill:
10
Filament: Hatchbox PLA
Category: DIY