1 / 15
Remix of Bolt together Puzzle Sphere for kids (that won't swallow m3 screws) — zdjęcie 1
1 / 15

Remix of Bolt together Puzzle Sphere for kids (that won't swallow m3 screws)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wanted to make the original but I did not have any inserts but a lot of M3 screws so I made this. Print: 1x center…

Ocena
0 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
540
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I wanted to make the original but I did not have any inserts but a lot of M3 screws so I made this.

Print:

  • 1x center
  • 2x every other file

You'll need:

  • 12x 8-10mm M3 hex bolts
  • 6x 14-20mm M3 hex bolts
  • 6x M3 hex nuts

It should be quite tolerant for ever the worst quality printers. Print faces vertically on one of the small flat sides and all the inside parts flat on the bed.

I made it from scratch but posted it as a remix as the whole idea comes from the original.

You will need to cut or drill the M3 holes in the center holes in the inside plates.

Category: Puzzles

Tagi