1 / 1
Prusa Mini Dual Drive Extruder Rev6 - Filament switch fix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fix to use filament sensor with the Dual Drive Extruder without a firmware hack
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 84
- Wydruki
- 3
- Wyświetlenia
- 1155
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (36)Powiązane
Fix to use filament sensor with the -excellent- Dual Drive Extruder without firmware hack.
You need both files, since the new top allows some room for the inversed filament lever-switch.
You still need to invert black and red wire. As stated in the original.
The v2 of the switch has a smaller gap for the magnet. It should now stay in there.