1 / 3
Radiator clip cover — zdjęcie 1
1 / 3

Radiator clip cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement for broken plastic covers of radiators with 10cm depth.

Ocena
5 / 5
Polubienia
9
Pobrania
64
Wydruki
1
Wyświetlenia
694
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Purpose
Replacement for broken radiator covers.
Simple snap on assembly on radiator.

Printing
Recommended materiel: PETG
Prints without support.

Assembly
[1] Print the parts.
    For one radiator you need
     2x cover
     4x fixation
[2] Assemble the caps
   No glueing required.
   Firmly push the snap-on-holder-parts dovetail completely into the groove of the cap.
   It is quite a tight fit, but with numerous prints I had no issues with broken parts.
   This only is a one time assembly as the parts keep connected firmly.
[3] Assemble to radiator
   Pull off the old/broken radiator cap.
   Snap on the assembled replacement in place of the old cap.

Tagi