1 / 2
Chuck Key Holder for Grizzly G0602 and Similar Lathes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple chuck key holder for my Grizzly G0602 lathe. It hooks over the top edge of the backsplash and…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 518
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (23)Powiązane
This is a simple chuck key holder for my Grizzly G0602 lathe. It hooks over the top edge of the backsplash and provides a place to store the chuck key when it's not in my hand.
Print Settings
Printer:
Makerfarm Prusa i3v
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30%
Filament:
eSun ABS
Green
Notes:
This should be printed with the top flat side down. It will build with 35-55 degree overhangs, which most printers can handle easily.
Category: Machine Tools