VFD Control Panel for Jet Drill Press (Multi-Material)

This replacement nose piece and control panel for the Jet JDP-17MF drill press allow mounting of a direction switch, speed control and tachometer for VFD conversion.

I have provided STL and STEP files for the replacement front housing as well as the control panel and an insert for the drum switch. The control panel and drum switch are multi-material parts with the text embedded in the panel with a different color of filament. If you don't have a multi-material printer, you can print the parts with the text recesses empty and then paint them in as desired.

Video on YouTube: https://youtu.be/Hd_x2jSgz9A

Here are the parts I used for this build:

*This site contains affiliate links for which I may be compensated

Linear Potentiometer Assortment (Amazon*): https://www.amazon.com/gp/product/B016XMI8CA/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=clll016-20&linkId=6f08dc739bb7881c01f121034d33fe2d

Potentiometer Knobs (Amazon*): https://www.amazon.com/gp/product/B016XMI8CA/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=clll016-20&linkId=6f08dc739bb7881c01f121034d33fe2d

3-Position Drum Switch (eBay*): https://ebay.to/2Ljcd0F

Red LED Tachometer Module (eBay*): https://ebay.to/35Mt7i0

I printed the black parts in eSun Black PETG Filament, 1.75mm (Amazon*): https://www.amazon.com/gp/product/B016XMI8CA/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=clll016-20&linkId=6f08dc739bb7881c01f121034d33fe2d

Print Settings

Printer:

MakerFarm Prusa i3v

Rafts: 

No

Supports:

Yes

Resolution: 

0.2mm

Infill:

30-50%

Filament:

eSun PETG

Black and White

Notes:

I used PETG for the body because it is so large and it is difficult to print flat. I used ABS for the inset text, because it's easier to control oozing, but PETG would also work fine.

Category: Machine Tools