Antique Toy Jeep Wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement wheel for an antique Jeep toy, made for a friend. He tells me that it's a toy from his…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement wheel for an antique Jeep toy, made for a friend. He tells me that it's a toy from his childhood, probably manufactured in the 1940's. It was missing one wheel, so I sketched this one up, printed and painted it as a replacement.
*This site contains affiliate links for which I may be compensated
The part in the photos was printed with eSun ABS in black (http://amzn.to/290GJLc), solvent-welded with Testors Plastic Cement (http://amzn.to/29dUofZ) and painted with Testors Acryl Orange (http://amzn.to/290GCiD).
Print Settings
Printer:
MakerFarm Prusa i3v
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
40%
Notes:
This wheel has no flat surfaces. If you have a good support generator, like Simplify3D, you can print it with the back side down on support material. Otherwise, the best approach is to split it down the center, print both halves face-up and then solvent-weld them together. That's what I did for the wheel shown in the photos.
Category: Toy & Game Accessories