Adjustable-Tilt X Carriage for Double Extruders on MakerFarm Prusa i3v
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a drop-in replacement for the stock MakerFarm Prusa i3v X carriage mount that adds an additional eccentric on…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a drop-in replacement for the stock MakerFarm Prusa i3v X carriage mount that adds an additional eccentric on one of the upper wheels. This allows the entire carriage plate to be tilted left and right to level dual extruder nozzles.
This plate will work with both the Itty Bitty Double Extruder and the Itty Bitty Double Flex extruder.
This removes the need to tilt the entire X carriage to level the nozzles.
Instructions
You will need an additional eccentric cam to install in the larger top wheel hole. Your printer kit may have come with an extra, or you can purchase one from MakerFarm or OpenBuilds.
Category: 3D Printer Parts