Small radiator hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tiny radiator hook for anything... Made to be minimalistic.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 154
- Wydruki
- 2
- Wyświetlenia
- 807
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This little beast packs a whooping 2 grams of filament and still can hold several kilograms of weight. (3 grams with supports)
Bag in the picture weighs just over 6 [kg].
Because the tensile strength is more important than yield strength in this application, PLA is discouraged to be used as a material. I use ASA and PETG with great results.
Spacing between the grappling arms are 4 [mm] and each are 6 [mm] wide. I don't know if there here is a branch standard on these grates, but it works with at least two of the brand we have at home. (Look at the pictures for clarification.)
Printer settings: This must be printed laying on the side, preferably with supports so that layers adhere perfectly to each other. No brim should be needed.
Material: Any material that doesn't snap and is to stiff. So PETG, ASA, ABS, Nylon, PP etch should be fine. I use PETG.