W203 License Plate Light Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
License plate light housing for a W203 Mercedes Benz
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
W203 C200 License Plate Light Housing, modelled to stock dimensions.
Part no : 203-820-0556-64-OR or A203820055664
You will need the stock screws & festoon bulb holder prongs. Some insulation tape could also be used on the back.
I've also included the .step file. Inside said file, I modelled the festoon prongs, they seem to made from stainless steel sheet metal and serve to both hold the 36mm festoon bulb & as connector pins. I think it's possible to remake them.
If you want to alter the design; to fit threaded inserts or other festoon bulb holders (not sure how to wire to the connector then..) feel free to do so :)
Update - 23/1/22
- Changed center-to-center distance of the lens screws from 47.5mm to 49mm
- Removed screw holes countersink, changed to straight 3mm hole
- Redesigned the connector & left side ribs to the correct dimensions
- Increased the right side latch mechanism's thickness
- Added .step file, which contains the housing + festoon bulb holder prongs
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes, Concentric
Resolution:
0.2mm
Infill:
20-30%