🟦🟥 Blue Light filter (night mode) for your MK3s display

Info:

• I am often using display covers like this one while printing at night and I like it
• but too often, I want to check the display in the dark room :) 
  • and i do not like being blinded by sharp white and blue light (even with minimized brightness in settings) 
• so this is simple 1-layer MK3S blue light filter for night printing in dark room, which I have found useful
  • you can check the display and your eyes will not hurt :) 
• it is meant to be put directly on display (not on the black rim of the display)
  • the rim is elevated and you need this print directly on display for better readability
• note that during the day, with non-transparent filament, you will not be able to see through

Scale:

• please note that not all display dimensions inside the black rim may be the same, so you may need some scale adjustment on X or Y axis

Print instructions:

• filament:
  • use some violet or dark red filament
    • I have used non-transparent violet
    • if the filament would be transparent, the filter would not be so useful - probably you would need more layers used or something..
• use slow printing (20mm/s)
• 1 layer for 0.2mm layer height
• 1 perimeter