modular Wallmount-system for various powertools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wallmount for various Einhell power x change tools. And others.
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 1948
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Hey everyone,
i designed a wallmount for my Einhell powertools and thought i'd share with you.
You will need something with a 20mm diameter and appropriate length to fit everything you want on it. I've used a aluminium pipe from the hardware store.
Should probably work with other powertools, too.
I'll try to include some measurements so you can see if your tools will fit.
i created this modular, so there is a baseplate that mounts to the pipe and all other toolholders will be screwed to the base. You'll need some m4x10 screws for that.
Everything is printed in PLA, 0.3mm layers.
You can find them all in this collection:
https://www.printables.com/social/130907-godnamedthor/collections/168689