TS100 Solder Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nice little Box for all your Solder stuff. Easy to carry. I put a 19V Notebook cahrger and a Makita 19V Battery…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 829
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
A nice little Box for all your Solder stuff. Easy to carry.
I put a 19V Notebook cahrger and a Makita 19V Battery Mount in the Box to use the solder Iron either on Battery or with the charger.
Print Settings
Printer:
Tevo Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30
Notes:
3 Parts - easy to print - fit perfectly together. If you want to enforce the hinges the at the back use higher infill for that part, or all of the model. In fact, there is not much infill at the bottom of the case.
after Printing you need 2 M3 screws for the hinge and 2 strips of metal for the Makita connector. - see the Pictures. Not to hard to make and bend at your workshop.
If needed screw the makita Block to the Case with nuts and bolts like I did. (M4)
have fun with it.
Category: Electronics