DV6JP Super Hero Joel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Super Hero needs a way to move fast from place to place. My Hero Joel owns a new very hot (around 210°C) DV6 Jetpack.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 1084
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With a speed up to 200.000 mm/s (720 km/h or 445 mph) and an acceleration of up to 400.000 mm/s^2 the DV6JP (double V6 Jetpack) Super Hero Joel can reach speeds no human could survive. He is a true Super Hero.
The only downside is the need to stock a few roles of filament for longer flights.
Remixing
The modeling process took me maybe a few to many hours, but i have to say modeling in Meshmixer and Fusion 360 is not ideal. I used many plane cuts and tried to sculpt all the corners away caused by the shredding of the model in too many pieces, for example to remove the allen key and the cape.
Printing
I think the model would be far better for SLA printing than for FDM printing, but because i only own FDM printers i have to somehow get along with the support material.
I printed it on my modified Anet A6 at 0.12 mm with a 0.4 mm nozzle and the print looks surprisingly good.
If someone wants to print it on a SLA machine i would be very happy to see your photos.