Sharper Image Power Percussion Deep Tissue Massager custom head connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom head attachment, including gasket and mounting screw holes. Plus an example attachment for personal wellness
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 205
- Wydruki
- 0
- Wyświetlenia
- 3124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- BSD License
Tool: https://www.costco.com/sharper-image-power-percussion-deep-tissue-massager.product.100776494.html
This provides a way to attach and create custom massage heads
USE:
Three 5mm screws are used for mounting. Centered on a 5mm inscribed triangle (each hole is 5 sqrt(3)≈8.6602540378mm away from each other.)
SHAFT:
| Material | PLA or PETG |
| Placement/Support | Orient with thic part on print bed. Remove the center single-layer portion after printing, this is just a built-in support. |
| Infill | Any infill should be fine. |
GASKET:
| Material | TPU or other FLEX |
| Placement/Support | Orient with thic part on print bed. |
| Infill | Zero infill, keep both vertical and horizontal walls about 0.4mm so it's easy to put on and take off. |
Post print:
(Optional) spray the parts (other than gasket) with Truck Bed Liner to make it more study and body safe and easy to clean (I heard that Rhino Spray-On Bed Liner is food safe)
Push the gasket onto the shaft, much like how it works on the heads normally. Attach it as if it were a normal head.
EXAMPLE ATTACHMENT:
This is an attachment built for a variety of Men's Sexual Wellness toys, I've seen them branded as “FPPR” "MOON" "Snail" "YA Wave" and "SONICS Conquer".
To get them to vibrate less, I put some foam between the attachment and the can, as well as tighten the grip on the can with velcro. Have a fun time :)