Finnex Planted+ 24/7 SE 20" Mount, low profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low profile mount for the Finnex Planted+ 24/7 SE 20" light. Designed to be press fit into the recessed pocket and…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Low profile mount for the Finnex Planted+ 24/7 SE 20" light. Designed to be press fit into the recessed pocket and slot on each side of the light. Snaps into the lip at the top of a standard 10 gallon tank.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
50%
Filament: Overture PETG Grey
Notes:
Print on its side with the mounting posts pointed up.
Increase perimeters or add a slicer modifier to guarantee 100% material fill where the posts extend from the bracket. Posts built on top of infill will be weak and likely to crack.Make sure you remove any bits of support material from the inside edge or the assembly may be too wide and push outward on the sides of the tank.
Category: 3D Printing