1 / 1
Fiamma Carry Bike VW T4 Parts — zdjęcie 1

Fiamma Carry Bike VW T4 Parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My own designed replacement Fiamma Carry Bike VW T4 plastic parts

Ocena
0 / 5
Polubienia
13
Pobrania
179
Wydruki
0
Wyświetlenia
2070
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Original redesign of ‘Fiamma Carry Bike VW T4’ parts made in fusion360. I've put equivalent part numbers in file names.

This replaces;
Frame spaces with square ones - part #98656-586
Rubber pole sleeves - part #98656-859
Carrier rail ends with a soft cornered versions - part #98656-999
Clip used to secure the carrier when not in use  - part #98656M010
Buttons plugs for the frameholes - original item


I repainted my rack black and converted it to fit a Berlingo. It was a 2nd hand find, all the red plastic looked faded to pink. The cost to buy black parts was more than what I paid second hand, hence replacing it with printed parts.

Some notes: 
You'll need to take into account shrinkage and fiamma tubes aren't round but squished slightly from bending and stamping holes. I used a heat gun to soften ASA to make it conform the irregular shapes. 

There's a Zip tie hole for the clip, print that without supports. The hole was added for a zip tie to prevent it from getting knocked off just in case you whack it loading a bike so not to loose it.

The pole sleeves and carrier ends are friction fit designed to be hammered/pressed on.

Tagi