Jinx - Arcane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printable model based on Jinx from Arcane - Printable on an Elegoo Mars!
- Ocena
- 4,963 / 5
- Polubienia
- 2057
- Pobrania
- 10 429
- Wydruki
- 44
- Wyświetlenia
- 71 516
- Oceny
- 27
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES
@Magnavis_ - Twitter & Instagram
If you would like to show some support for my files, you can do so here:
Hi there!
This is my 3D model of Jinx.
She has been split for ease of print and paint, and has been keyed in such a way that the joints are almost entirely hidden when pieced together, giving you an almost seamless model once assembled. There are no pre-cut holes for magnets, but you could quite easily do this yourself, if you wish.
With the exception of the base (though there is an optional Part A + Part B that I think will fit on newer versions of the Mars) she will print entirely on an original Elegoo Mars, or similarly sized resin printer. Of course, she'll print on larger formats too.
NOTE: This model has been designed with resin printing in mind. You may be able to print her with FDM machines, but that was not my intention, and so the files are in no way optimised for doing so!
All parts have been test sliced and hollowed (if necessary) in Chitubox.
I've now printed all of the parts, and uploaded some pictures of the prints. It all goes together super well, and I'm very pleased with its overall design!
When printing, I'd suggest hollowing most of the parts, with the exception of the smaller bits, including:
- Jinx Hand L
- Jinx Hand R
- Jinx Hair Bangs
- Jinx Belt Buckle
- Jinx Braid L+R 001-003
- Jinx Base Nameplate
Putting her together should be pretty self explanatory. You can use the images provided as reference if you need to for both assembly, and also paint.
For the base, if printing on FDM, consider printing it on it's side. Cura was trying to print the top surface a little oddly for me, so I printed it on its side instead, and it printed great.
If there are any issues with the files, I'll do my best to be helpful. Also, if you're using a slicer which ‘checks’ the models before printing, please don't panic if it tells you any of the parts are ‘non-manifold’ - this will simply be from the boolean operations around the joints. Just ignore it!
I look forward to seeing some of these printed, and painted!
THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES