Airtag mount for bike backlight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Airtag container with screw thread for hidden mount behind standard bicycle backlight (screw distance 49mm)
- Ocena
- 4,5 / 5
- Polubienia
- 35
- Pobrania
- 218
- Wydruki
- 2
- Wyświetlenia
- 1735
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Simple and easy to print housing for an airtag for hidden mounting on a bike. It uses the usually free space on the rear light attachment. We have several bikes and the distance of the 5mm screw bolts of the taillights always measures 49mm. Please check if the dimension also fits at yout bike.
We printed with 0.2mm layer and 20% infill without any supports or frames with PETG. To prevent the screw thread of the cap from jamming, I have designed with 3% overstretch X+Y. Therefore, everything should fit well together (like our prints).