CTC Bizer / Makerbot X-Axis Carriage for E3D-V6 Hotend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After upgrading mit CTC to the E3D-V6 hotend using X-Axis Carriage designs, I found here on Thingiverse, I wanted to…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 674
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
After upgrading mit CTC to the E3D-V6 hotend using X-Axis Carriage designs, I found here on Thingiverse, I wanted to be able to see the nozzle with my webcam during printing. Furthermore I wanted to have 2 cooling fans on the side to improve cooling. So this is the design I came up with.
The filament guide is designed for a 6mm PTFE tube. The extra space between the end of the tube and the filament drive block is for easy accessibility during filament loading or unloading.
You will need:
Screws DIN 912:
-M2 x 12: 2 pcs
-M2 x 20: 4 pcs
-M3 x 16: 4 pcs
-M3 x 20: 4 pcs
Nuts:
-M2: 6 pcs
-M3: 4 pcs
Misc:
-4010 cooling fan: 2 pcs
-cable ties: 2 pcs
-In my case, the X-belt was too short to fit in the mounting bracket, so I purchased a longer one
Print Settings
Printer:
CTC Bizer Dual
Rafts:
No
Supports:
Yes
Resolution:
0,2mm
Filament: ERYONE PETG
Category: 3D Printer Parts