Rudolph The Jewlery Reindeer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A jewlery stand in the shape of a deer.
- Ocena
- 4 / 5
- Polubienia
- 17
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 763
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a jewlery stand in the shape of a reindeer. And it makes an excellent Christmas gift. At least that is where the model comes from. I made it out of wood on the bandsaw, however the 3D model exists, why not print it!
The gcode is set up with a .1mm layer hight at 10% infill, this is purely to reduce the filament use and benefits smoother surfaces. The mirrored version is, what should it else be, just mirrored with the help of the slicer. If you slice it yourself, make sure, the model lies on the flat side.
And, in case you want to try to cut it from wood with the bandsaw, I added a drawing you can glue on to the wood piece.