FGC-68 tipx edition: TMC lower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TMC lower for the FGC68 platform
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 608
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
----------------
the parts list and the documentation to get started can be found here the link to the new manuals can be found here
https://drive.google.com/drive/folders/1cR-nfubPEXCrr6-0PsUFC_jSHIq18V4U?usp=sharing
---------------
11-10-2024
M5 nut lower have been added. for a stronger connection
it will use a 30mm long M5 bolt with 3d printed grips
-------
FGC68 GEN2 Updarted
the link to the new manuals and parts list can be found here https://drive.google.com/drive/folders/1POafTye0p9ps3qhr2-nWT2uAPL3kko1u?usp=sharing
____________________________
this lower will work with the basic FGC68 upper and parts.
but this lower will make it possible to shoot with your TMC mags for a higher round count.
the starter set can be found here:
https://www.printables.com/model/87803-fgc-68-base-package-starter-set-for-tipx-tcr-magfe
the collection of FGC68 parts can be found here:
FGC68 MKII
https://www.printables.com/social/180009-untangleworks/collections/88908
FGC68 MKI
https://www.printables.com/social/180009-untangleworks/collections/88907
a video about this lower will be made later:
the ABD installation video can be found here:
https://www.youtube.com/watch?v=5IxGVSHOZ00&t=3s
some of the installation steps that are different from the TIPX lower can be fund in the images for now
parts needed for mag catch.
1x spring 6mm OD, 0.5mm wire, 20mm long
1x m3 bolt in a length of 30mm
1x m3 washer
1x metal pin 4mm OD, 27mm long (a 3d printed part can be used for this)