1 / 2
CR6 SE Extra Drawer plus Z-cover — zdjęcie 1
1 / 2

CR6 SE Extra Drawer plus Z-cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extra storage for CR6-SE.

Ocena
0 / 5
Polubienia
7
Pobrania
38
Wydruki
1
Wyświetlenia
327
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I took the CR-6 drawer that takman29 created ( https://www.thingiverse.com/thing:4656033 ) and the Z-cover that RICBRU created ( https://www.thingiverse.com/thing:4670030 ) and just simply combined them, then fixed the drawers to fit.

The cases fit snugly in the rails, so make sure it's what you want because they aren't going to come out easily. It will, I've pulled them off a couple times just to test, but it's a struggle, which I consider to be good because I don't want it to move around. If you want just the drawer or just the z-cover, then go to the links above. Both are great models.

I suggest printing the rails with either 50% or higher infill for strength. Originally did 20% and they broke right off. (https://www.youtube.com/watch?v=su_m5zV9rvA&list=LL&index=14) here's a link to CHEP that does a great job at explaining how to print models with different infills at different places.