Cutting disc 6 blades for landroid with adapters - Messerscheibe landroid mit 6 Messern und Adaptern
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cutting disc and adapter to solve stucking problems at bumpy surfaces
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 264
- Wydruki
- 0
- Wyświetlenia
- 2742
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cutting disc 6 blades for landroid with adapters - Messerscheibe landroid mit 6 Messern und Adaptern
If you like it --> press like it :-)
Cutting disc with up to 6 blades, holes for thread insert which will be installed with a solder iron and two adapters. One is for the original height of the disc and one is 5mm closer to the cutting protection.
The problem at the landroid is, that if you reduce the cutting height, the protector will go down and the landroid will stuck at bumpy surface or if he should drive a tight curve on a small hill like in my case. With the adapter you will reduce the distance of the disc to the protection, so that if you choose 50mm cutting height, it is 45mm cutting height.
Should be printed stable, PETG is recommended.
I use an Landroid WR141E, maybe it will work on other landroids. You will need three longer screws to assemble the disc with the adapter.
I´ve used thread inserts M4 from VIBIRIT. They have a height of 6,3mm outer diameter 6,3mm and centering diameter of 5,5mm.
The use of the parts is on your own risk, no liability for injury or damage.
Would be happy to see your makes!