Arrma 1/5 kraton,outcast 8s rear arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two versions of rear arms.. -I recommend atleast 3 or 4mm walls/bottom/tops with vertical printing.. For best…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 768
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Two versions of rear arms..
-I recommend atleast 3 or 4mm walls/bottom/tops with vertical printing..
- For best durability make 100%infill..
- This is rear right arm.
- For left arm - mirror this part.
- It is a perfect fit.
-it doesnt have holes for swaybar because I dont use it
For quick test I printed it flap with 1mm walls and 40% infill(PETG).. it was working good but broke on a medium/big jump.. That is why I recommend vertical printing because the walls in the holes for pins will have circural pattern and therefore harder to break..
For vertical use full support option. I am also using a brim but maybe it is not needed.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
40
Filament: AzureFilm PETG black
Category: R/C Vehicles