Traxxas TRX-4 Front Mounted Battery Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a battery tray that fits in between the chassis rails in front of the servo to help bring some weight to the…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 677
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a battery tray that fits in between the chassis rails in front of the servo to help bring some weight to the front. The opening on the front side is for the balance lead. You should secure that using the battery strap.
I use it with a 3S 1500mAh lipo which fits perfectly. This gives me about an hour run time in my TRX-4 Sport. Picture is from my version 1 design
Please let me know what you think of it and share your 'makes'!
Enjoy!
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
Any
Filament: Any PLA (ABS or PETG should work too) Any
Notes:
Print in direction shown in the picture.
Category: R/C Vehicles