1 / 7
Idler Arm with grooved bearing for E3D Titan Aero, Titan , and clones
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For this design I have been inspired by several designs: Justpass nebbian Hagster Trillogame With a few small…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
For this design I have been inspired by several designs:
Justpass
nebbian
Hagster
Trillogame
With a few small adjustments and adapted to use an MR95zz bearing for the motor shaft and a grooved bearing FZ0463 to guide filament (you will need a smooth 4mm or 3mm rod + adapter)
Category: 3D Printer Parts