Creality CR-10/Ender 3 Part Cooling Fan (40mm fan mount) - remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix - Trimmed off the tab that clips to the top of the fan shroud so that its easier to print, I don't think it…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 610
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remix - Trimmed off the tab that clips to the top of the fan shroud so that its easier to print, I don't think it needs this anyways.
Also added two spacers for the M2 bolts - these are removable, so just clip them with a pair of cutters, at the height you require
Loving and currently using this part with a 4020 fan, but I didn't want to futz with orientation and printing supports, so I've trimmed off the clip so that it can be oriented flat on the bed.
Also I have an Ender 2 that doesn't come with a fan, so I had to get my own M2 bolts. Mine are probably the wrong length (and probably a different length to the ones supplied on the Ender 3/CR-10), so I've added spacers for the M2 bolts at 6mm.
If you need them at a different length, just clip off those spacers at the appropriate height.
Print Settings
Printer Brand:
Creality
Printer:
Ender 2
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
25%
Category: 3D Printer Parts
