1 / 4
40mm fan magnetic mount for stepper motors
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This insert uses 5x3mm magnets to attach to the back of a stepper motor. You will need : 25mm M3 bolts for a 40x20mm…
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 124
- Wydruki
- 1
- Wyświetlenia
- 806
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (58)Powiązane
This insert uses 5x3mm magnets to attach to the back of a stepper motor.
You will need :
- 25mm M3 bolts for a 40x20mm fan
OR
- 15mm M3 bolts for a 40x10mm fan
Magnets are press-fit - use a pliers
Print Settings
Printer:
Tevo Tarantula
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2mm
Infill:
50% at least
Category: 3D Printer Accessories
