1 / 15
50mm fan micro mount for the Tevo Tarantula
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've designed this to be : small, only 7 grams easy to print and requires no supports, just orient it flat on the bed…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I've designed this to be :
- small, only 7 grams
- easy to print and requires no supports, just orient it flat on the bed
- perfect for new Tarantula owners using the filament that came in the box
- minimum additional hardware requirements, only needs a bolt + nut long enough to mount the fan (M3 or M4)
It basically redirects the blower fan thrust at about a 70 degree angle out of 3 vents, so it will work for both single and dual extruder hot ends.
Updates
- 10 Dec 2017 - Added a seperate logo piece - so you can print it out in a different color
- 14 Dec 2017 - Added a Hackaday logo and a ring for the blower fan you can print out seperately
- 22 Apr 2018 - Added "single nozzle" and "dual nozzle" versions - default model has 3 exhaust openings, so I've added versions with 1 and 2 openings instead.
- 6 May 2018 - Made the vent for the single nozzle much bigger.
Print Settings
Printer:
Tevo Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
at least 25%
Category: 3D Printer Parts