Suction-Cup Switch Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So, you'd like to secure a switch to a solid surface but you don't want to drill holes in it. Maybe you want the…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 513
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
So, you'd like to secure a switch to a solid surface but you don't want to drill holes in it. Maybe you want the freedom to move the switch around and putting down Velcro each time is too restrictive or you just don't like the adhesive residue that it's likely to leave behind.This design uses a suction cup to hold the switch in place. This is one possible solution. We don't claim it's the best solution or even a great solution - but it works. We're open to improvement suggestions!
For more information about how to assemble the switch mount go to: http://volksswitch.org/index.php/volks-devices/suction-cup-switch-mount/
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.15 mm
Infill:
10%
Notes:
You can print at 0.2 mm but the threads will engage better if printed with finer detail. Also print with at least 2 perimeters.
Category: Other