1 / 3
DIN clip attachment for Arduino and Nucleo64
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIN clip attachment for Arduino Zero, Uno, Due, Leonardo and Mega and for Nucleo64 boards.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Can be used on various Arduino and STM Nucleo boards:
- Arduino Zero
- Arduino Uno
- Arduino Due
- Arduino Leonardo
- Arduino Mega
- STM32 Nucleo64 boards
It can be used on any board that has the same hole position as Arduino Uno board. One example is nRF52840DK.
Print settings:
- layer height: 0,2 mm
- perimeters: 2
- infill: 15% (gyroid pattern)
Additional material
You will need 3 M3 x 15 (or M3 x 16) screws and 3 M3 hex nuts to attach development board to the attachment.
For DIN rail clip and holder see my collection DIN rail prototyping station.