1 / 8
Pen Holder 4-1 (with a little suprise) — zdjęcie 1
1 / 8

Pen Holder 4-1 (with a little suprise)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Never again leave your favourite Pen with the other filthy office utils

Ocena
4 / 5
Polubienia
11
Pobrania
16
Wydruki
1
Wyświetlenia
790
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

Have you ever been sick of searching for your favourite pen in your ordinary pen holder ? With the pen holder 4-1 this issue is no more! Place your beloved writing tool in the pen holder an never search for it again. This design comes with a little surprise....IT'S CEMENT *insert Gina Linetti meme*  your ordinary pen holder just tips over every god damn time you touch it. With the cement base, the pen holder 4-1 will never fail to secure your favourite pen.

Printed in 0.2 

Gcode for the Prusa Mini/+ attached, including pause for pouring the cement and a Colour Change.

for the cement use a ordinary art cement, these are cheap an come with a huge amount ( you just need about 30-40ml of dry cement for this pen holder). Pour the mixed cement with a little spoon CAREFULLY into the open support structure. Wipe away every mess you made away ( a cotton swap with isopropanol works just fine). Wait for about an hour for the cement to dry, the heated bed helps a lot. When the cement is dry and the top layer of the model is clean resume the print. 

 

Edit 07.06.2022

  1. changed the diameter of the Pen from 10,4 to 10,8 for more clearence 
  2. added seam painting in the sliced model
  3. the pause command is two layers further than before for more solid layers between the hollow bottom and the upper walls 

Tagi