1 / 4
MiGe M10010 Shaft connector Simracing AZ Design — zdjęcie 1
1 / 4

MiGe M10010 Shaft connector Simracing AZ Design

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shaft for MiGe M10010 Small Servo connector for 22mm shaft (and key) to 70mm 6xM5 holes

Ocena
0 / 5
Polubienia
8
Pobrania
70
Wydruki
0
Wyświetlenia
630
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hi! This is the first design I'm uploading here. I originally didn't even plan on publishing a polished version of it but hey I guess it could help some people out there getting into the (diy) simracing hobby. The concept is simple, it's a connector for the 22mm diameter shaft (with slotting key!) from the MiGe small servo connecting to the quick release 70mm bolt holes. 

IMPORTANT: To secure the connector axially to the shaft, please use an M6x20 Bolt (DIN 912, pictured in the last image). 

I printed this in PETG with 0.3mm layer height and 40% infill (print with support!), and I haven't had any issues with it thus far. Fits like a glove! Protip: Use the screw to slide the connector into the shaft, the fit might be a little tight :P 

I hope you have fun with it, and if you have any questions, don't hesitate to contact me :)

-Alex
 

Email: 
[email protected]

Discord: 
alexzapff#9119

Tagi