jewelry tree
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As a gift for my gf's birthday I decided to make another jewelry holder. This one's supposed to look like a tree (the…
- Ocena
- 4,8 / 5
- Polubienia
- 254
- Pobrania
- 1976
- Wydruki
- 7
- Wyświetlenia
- 10 894
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As a gift for my gf's birthday I decided to make another jewelry holder. This one's supposed to look like a tree (the pineapple hangers are another gift which I'm going to upload in foreseeable future).
I made the tree with blenders tree generator which is unsuitable for 3d-printing due to mesh-intersections and open holes everywhere. After a few hours of fixing everything manually it's at least printable with cura 3.6 but still mesh quality is rather bad.
Prepare to print it with a worrisome amount of support; obviously "tree-support" (it's made to support trees) works best.
edit: I fixed a few mesh errors and split the thing up in 2 parts. This way it's much better printable without using tons of fancy support. Still uses a lot though.
Print Settings
Printer Brand:
Wanhao
Printer:
Duplicator9
Rafts:
No
Supports:
Yes
Resolution:
0,2 mm
Infill:
30%
Filament: Extrudr Green-tec pro black
Notes:
I printed it with rather expensive green-tech pro because it has the best overhang performance for me, support removal is rather easy (if you print support in a much faster speed than the rest) and it just looks delightful with a matte surface.
As I noticed above: use tree support.Category: Fashion