Makita DUB185 Blower wide nozzle and intake filter (car dryer)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wide blower nozzle for Makita DUB185
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 1801
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A friend asked me to design a wide nozzle to use the Makita DUB185 blower to dry his car after washing.
I added an intake filter to prevent small particles getting sucked in and shot onto the car paint surface…
Just get a piece of filter mat, cut it out and place into the filter holder.
Slice the filter cap with zero bottom and top layers, 10% honeycomb infill, 3 perimeters.
Slice the filter itself with a height modifier 0-5mm and set top and bottom layers to zero within that range, also set 10% honeycomb infill and 3 perimeters (outer walls).
Other than that, I used the standard PETG profile and 0.2mm layer height print profile in PrusaSlicer but set the layer height to 0.25mm to save some printing time.