EasyMeter Q3 Adapter (ESP Lesekopf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter for the EasyMeter Q3 series power meter. It is to adapt DIY-style IR-readers. In my case the "ESP…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 584
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an adapter for the EasyMeter Q3 series power meter. It is to adapt DIY-style IR-readers. In my case the "ESP Lesekopf".
Print this, so the depression for the washer faces up. Then no supports are needed.
After printing insert a M12 washer into the depression in the lower side.
DISCLAIMER:
To have access to the diodes you first have to remove the seal on the top side of your meter. This is a safety-seal so your power company will know you tampered with it. Be sure to ask for your power companys permission first. I am not responsible for anything that happens.
Print Settings
Printer:
JGMaker Magic
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0,2
Infill:
15%
Filament:
Ginatram PLA
white
Category: Electronics