D20 Valve Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits onto any Schrader valve including on car tires
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 281
- Wydruki
- 2
- Wyświetlenia
- 1073
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
It's a D20 for your car tires! Print it out and screw it on!
Threads are made to standard. If it doesn't fit on your valves, print at 101% or 99% to get a better fit; some tolerance stackups may make hard fits. Also might need to be reoriented to print on a full-face depending on how well your printer is calibrated; use a brim regardless.
Print at 100% infill, supports optional but not required if you're dialed in, brim, and 0.1mm layer heights (0.2mm initial layer height). I HEAVILY recommend slicing your own file since I don't own a Prusa printer, but Printables wouldn't let me upload G-code for the design competition with my preferred printer's (Sovol SV-01) code (something about M420 command not allowed).