Fridge bottle holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps your bottles from rolling around, fits most cans and bottles up to 1.5L.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 262
- Wydruki
- 2
- Wyświetlenia
- 2211
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Store bottles of your favourite beverages in the fridge with more convenience and efficiency. Allows to stack most cans and bottles up to 1.5L.
Dimensions WxDxH: 72x142x19mm
Printing
0.2mm layer height required, white colored filament recommended (for aestetics).
You need to print more than 1 instance of this part to actually stack the bottles. Typical setup is 3 parts for a 6-bottle stack. 5+ parts to fill the whole shelf also works. :)
As this uses only 5 meters of filament, you can print every part from leftovers of different rolls.
Building
After printing, connect the parts using paper clips, as shown in the photo.
This model was designed to use as little material as possible. It might feel fragile in your hands, but it works well when used as intended. At the moment of publishing I constantly use it for 6 months with no issues.