Pegboard mounted coffee cup holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I decided I needed another cupholder on the pegboard above my workbench - the other one works great with beer bottles…
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 663
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I decided I needed another cupholder on the pegboard above my workbench - the other one works great with beer bottles and cans, but I needed something to hold my Yeti 20oz cup as well as the larger coffee cups I use. So this has a 3.75" interior, is 3" deep and has a slot for the cup handle. I've created some updated pins to mount it to the pegboard from the ones from my other designs - I also gave it 6 pin openings so it stays nice and snug on the pegboard. You will need 2 of the pins with the shorter heads for the center holes and 4 of the pins with the thicker heads for the four outer holes.
Enjoy!
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
I did it at 0.3mm, doesn't really need more
Infill:
10% worked fine
Notes:
3 shells
Category: Organization