Cable Drag Chain for Vulcanus V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I just designed a simple mount for a cable drag chain for my Vulcanus V1 (2016) an thought someone may like to use it…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 754
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I just designed a simple mount for a cable drag chain for my Vulcanus V1 (2016) an thought someone may like to use it as well. The part on the x-carriage (2016 Version!) is glued on to with acetone - the part on the back is mounted with 2 M3 screws and M3 square nuts. If you modify the part that goes on the x carriage you should be able to adept the part to most 3d printers.
The mount is designed for a 20x10mm drag chain, I just ordered this one:
http://www.aliexpress.com/snapshot/7852889247.html?spm=2114.13010608.0.53.AkDCg8&orderId=76585111359057
I also uploaded the .stp files, so you can edit the model, if you are planing to use a different drag chain
Print instructions
Category: 3D Printer Parts