Armrest Spacer for Secretlab Chairs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Was designed for my Secretlab Titan 2019/2020 series chair.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 787
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
WARNING : If you use this you won't be able to make the chair lean all the way back because the arm rest will collide with the two handles under the chair. It's fine if you remove the plastic part of the handle. (I'll try to design a shorter handle as a workaround soon)
I'm tall, and looks like I have long arms or something. Even at the lowest settings, I couldn't use the arm rests without having to push my shoulders up which was not comfortable/ergonomic. I designed these blocs to be able to put the armrests lower.
You'll need to buy longer screws to use instead of the screws that came with the chair.
You can scale the height in your slicer if you need to, simply make sure you can get screws long enough before doing this! Also make sure to use a good amount of walls to make sure the blocs are solid enough.
Personnally I printed them with 8 walls in PETG about a year ago and they haven't broken.