Mounting kit for Titan extruder with pancake motor on different Ender 3 + 5 types

I didn't like the original suggestion for mounting titanium extruders from Printer Mods, because the center of gravity shifts too far and vibrations can occur.
I had already posted a suggestion for mounting the extruder on an Ender 5 here some time ago, but it did not fit on an Ender 3 (pro).
On Amazon, for example, a Titan extruder with pancake motor is available at https://www.amazon.de/gp/product/B07RQG783T/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&th=1.
The baseplate for the carriage was https://www.amazon.de/gp/product/B096VNG6L1/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 for the Ender 3 and https://www.amazon.de/gp/product/B09928K2J3/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&th=1 for the Ender 5.
The printed parts adjusted in depth so that the back of the motor is the deepest point.
This allows the whole thing to fit on an Ender 3 without hitting the frame or limiting the print range (tested now, no problems with the frame!).

Additional metal parts needed:
4 screws M3 x 10
2 screws M3 x 20
10 press-in nuts M3 (4 x for mounting the motor, 6 (3 per mounting hole) for fastening to the carriage)

Attention: when using the motor, the motor current must be reduced! However, there is still sufficient torque due to the gearbox of the extruder. Tested with 500 mA, works fine with cold motor.

This mod based on these designs:
https://www.thingiverse.com/thing:4695802 for the motor holder
and
https://www.thingiverse.com/thing:4126727 for the mounting bracket
My explicit thanks to these designers!

One more note: the links are only for illustration of the parts used, there are also other suppliers ;)