LowRider 3 CNC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Full sheet, large format CNC.
- Ocena
- 5 / 5
- Polubienia
- 970
- Pobrania
- 9635
- Wydruki
- 37
- Wyświetlenia
- 47 567
- Oceny
- 31
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated LowRider CNC v4, here, https://www.printables.com/model/1034840-lowrider-4-cnc
This is a full sheet capable CNC router.
Size is up to you within reason, tool you use, control board, firmware, and end use is also up to you. I am doing my best to provide an inexpensive and flexible platform for people to use for their specific needs.
I do believe most can buy from the V1 Store or self source and pretty easily keep the entire build under $800 USD. Far less if you have a 3D printer, or CNC at your disposal.
All the details, lists, and instructions can be found here, https://docs.v1e.com/lowrider/
Looking at about 2.2kg for a full sheet build's worth or prints, any rigid filament will work, but PLA is recommended.
Licensing info can be found here, https://www.v1e.com/pages/trademark-and-file-licenses .
Changelog-
4/12/23 - ZStop Parts updated to V1. The new parts fit the endstops a bit better.
9/17/22 - Minor update to YZ plate DXF's, easier assembly with access to brace screws now, Z endstop adjustment. Files changed -YZ plate DXF v1.dxf, YZ plate DXF v1 Mirrored.dxf
