1 / 4
2020 KTM 690 Enduro R throttle slop remover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The ride-by-wire throttle on the 2020 KTM 690 Enduro R has some play in it, a bit of slop when closed that I didn't…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 259
- Wydruki
- 5
- Wyświetlenia
- 1462
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 5) (Komentarze: 9)Remiksy (0)Kolekcje (23)Powiązane
The ride-by-wire throttle on the 2020 KTM 690 Enduro R has some play in it, a bit of slop when closed that I didn't like. This pair of spacers removes that. Note that there are twodifferent spacers; you must print the pair.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Resolution:
0.4mm nozzle, 0.2mm layer height
Infill:
n/a
Filament:
Atomic Filament PETG
black
Notes:
0.4mm nozzle is almost too big.
Category: Automotive