Parametric Hands-free Spectacle Torch/Flashlight Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tiny holder to clip a compact flashlight on your spectacles. Fully parametric, fast printing.
- Ocena
- 4,5 / 5
- Polubienia
- 162
- Pobrania
- 381
- Wydruki
- 3
- Wyświetlenia
- 2018
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A handy little clip/holder that is small enough to leave on a compact EDC flashlight, but is there for when you need hands-free light. The design is fully parametric so you can customise to fit your combination of spectacle frame and flashlight - all settings are annotated at the top of the .SCAD file.
Default settings are for the combination shown in the photo - a thin metal-armed pair of specs and my own favourite EDC flashlight, the Olight i3E EOS which takes a AAA battery. This design probably wouldn't work very well with superlight wiry rimless frames but should work with most other types. I have used this for a year and a half now and find it to be one of those “when you need it, you need it”-type prints.
Printing
Uses about 0.6m of filament at default 20mm length and prints very quickly.
Print upright (as oriented in files) with 100% infill.
I personally use PETG for everything but PLA would probably work just fine as long as you don't overdo the retaining barb ratio.