1 / 3
Traxxas Bandit rear camber link - 56mm — zdjęcie 1
1 / 3

Traxxas Bandit rear camber link - 56mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My son's Bandit got smashed by a bigger RC and broke the rear camber link. I created two variants -- one like the…

Ocena
0 / 5
Polubienia
14
Pobrania
94
Wydruki
0
Wyświetlenia
357
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

My son's Bandit got smashed by a bigger RC and broke the rear camber link. I created two variants -- one like the original with an inset on the inside (ribbed) and a completely solid one. I printed the solid since I wanted strength over, the presumed, cost and weight savings of the original style.

The link is 56mm center to center with a 5mm hole.

This isone part of the Traxxas 2441A set.

Print Settings

Printer:

Artillery X1

Rafts:

No

Supports:

Doesn't Matter

Resolution:

0.2

Infill:

100%

Filament:

Whatever PETG

Grey

Category: R/C Vehicles

Tagi