Subaru WRX medal/coin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently bought a 2017 Subaru WRX. For reasons not worth explaining, I named the car Mutley. So I decided he needed…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I recently bought a 2017 Subaru WRX. For reasons not worth explaining, I named the car Mutley. So I decided he needed a medal. Found some Subaru logo SVG files, created a basic medal in Tinkercad, and viola!
Included in the file pack are the double-sided medal, the same medal split in two to print without supports (but requiring gluing afterwards), and again split in 2 but with alignment holes & a set of pegs- can be glued or not. The pegs are a TIGHT fit, and this is by design.
I also included a 1-sided blank, a 2-sided blank, and a 2-sided split blank.
Print Settings
Printer:
Monporice Maker Select i3 v2.1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.16mm
Infill:
20% rectilinear (Simplify3D)
Notes:
The example in the photos was printed using a filament sample from the August Makerbox called "Silk" from Beaver 3D. I printed the model that was split, with alignment pins. I printed at 30mm/s (10-40 recommended) with a raft ( only because I have first layer issues without a raft), 3 shells, and 210C nozzle, 60C bed, cooling fan to 100% from layer 2 up.
Category: Automotive